Are you searching for john deere 1026r tractor's information? Here is the detailed information of john deere 1026r which include, tractor's reviews, mileage and user reviews.
You can also find john deere 1026r technical specifications & details like john deere 1026r engine details, transmission, john deere 1026r tractor tyre dimensions and attachment also included.
When you are in need to know any information about any old to new tractors model, then you can check by visiting this portal. Each and every model of tractors you can find with the latest price, specifications and all the details which you want to grab before buying old or second-hand tractors.
Manufacturer: |
John Deere |
Factory: |
Augusta, Georgia, USA |
Fuel: |
5.6 Gal [21.2 L] |
Hydraulic system: |
3.25 Gal [12.3 L] |
Rear Type: |
Limited I |
Control: |
Position Control |
Rear lift (at ends): |
1433 Lbs [650 Kg] |
Rear lift (at 24 inch/610mm): |
681 Lbs [308 Kg] |
Rear PTO: |
Independent |
Rear RPM: |
540 |
Engine RPM: |
[email protected], [email protected] |
Mid PTO: |
Independent |
Mid RPM: |
2100 |
Wheelbase: |
57.1 Inches [145 Cm] |
Weight: |
1444 Lbs [654 Kg] |
Serial Numbers Location: |
Serial Number Plate On The Right Side Of Main Tractor Frame Above The Front Axle. |
Engine (gross): |
25.2 Hp [18.8 KW] |
PTO (claimed): |
18 Hp [13.4 KW] |
Chassis: |
4x4 MFWD 4WD |
Differential lock: |
Standard |
Steering: |
Power |
Brakes: |
Disc |
Cab: |
Two-post ROPS. |
Type: |
Open Center |
Capacity: |
3.25 Gal [12.3 L] |
Pressure: |
2000 Psi [137.9 Bar] |
Valves: |
2 To 3 |
Total flow: |
6.3 Gpm [23.8 Lpm] |
Ground: |
Negative |
Charging system: |
Alternator |
Charging amps: |
40 |
Number: |
1 |
Cold-cranking amps: |
500 |
Volts: |
12 |
Engine Detail: |
Yanmar 3TNV76, Diesel, 3-cylinder, Liquid-cooled, 68.1 Ci [1.1 L] |
Bore/Stroke: |
2.9x3.2 Inches [74 X 81 Mm] |
Emissions: |
Interim Tier IV |
Rated Power (EC 97/98): |
25.2 Hp [18.8 KW] |
Fuel system: |
Indirect Injection |
Air cleaner: |
Dual Stage Dry |
Pre-heating: |
Glow Plugs |
Compression: |
23.5:1 |
Rated RPM: |
3200 |
Operating RPM: |
1400-3370 |
Firing order: |
1-3-2 |
Starter: |
Electric |
Starter volts: |
12 |
Oil capacity: |
2.9 Qts [2.7 L] |
Oil change: |
200 H |
Coolant capacity: |
3.9 Qts [3.7 L] |
Coolant change: |
2000 H |
Type: |
Hydrostatic |
Gears: |
Infinite (2-range) Forward And Reverse |
Oil capacity: |
13 Qts [12.3 L] |
Oil type: |
JD Hy-Gard |
Speeds: |
With 26x12.00-12 R4 Rear Tires. |
Lawn/turf front: |
18x8.5-10 |
Lawn/turf rear: |
26x12.00-12 |
Industrial front: |
18x8.5-10 |
Industrial rear: |
26x12.00-12 |
Weight (operating): |
1444 Lbs [654 Kg] |
Front axle load: |
1349 Lbs [611 Kg] |
Rear axle load: |
1576 Lbs [714 Kg] |
Wheelbase: |
57.1 Inches [145 Cm] |
Length: |
87.6 Inches [222 Cm], 102.6 Inches [260 Cm] (with Hitch) |
Width: |
47.2 Inches [119 Cm] (R3 Tires) 47.3 (R4 Tires) |
Height (hood): |
41.5 Inches [105 Cm] |
Height (ROPS): |
78.6 Inches [199 Cm] |
Clearance (front axle): |
12.3 Inches [31 Cm] |
Rear axle: |
Flanged |
Front tread: |
32.2 Inches [81 Cm] |
Rear tread: |
35.2 Inches [89 Cm] |
2WD turn radius: |
7.4 Feet [2.3 M] |
All the details about John Deere 1026r tractor given above which you should know before buying John Deere 1026r.
If you are still looking for any additional inforamations about John Deere 1026r, then you can give your feedbacks using mail.
We hope the informations which we have provided on this portal are enough, still you can send us your valuable suggestions and queries related to tractor's models and related to this site as well.
Leave a Comment
No Comment(s) Available