Are you searching for case international harvester mxu110 tractor's information? Here is the detailed information of case international harvester mxu110 which include, tractor's reviews, mileage and user reviews.

You can also find case international harvester mxu110 technical specifications & details like case international harvester mxu110 engine details, transmission, case international harvester mxu110 tractor tyre dimensions and attachment also included.

When you are in need to know any information about any old to new tractors model, then you can check by visiting this portal. Each and every model of tractors you can find with the latest price, specifications and all the details which you want to grab before buying old or second-hand tractors.

Manufacturer: CaseIH
Factory: Basildon, England
Original price (USD): $43,150 (2005)
Fuel: 46.7 Gal [176.8 L]
Rear Type: II (ROPS), II/IIIN (cab)
Control: Mechanical Lower Link (ROPS), Electronic Draft Control (cab)
Rear lift: 9,285 Lbs [4211 Kg], 12,185 Lbs [5527 Kg] (with Cab)
Rear PTO: Independent
Clutch: Electro-hydraulic Wet Plates
Rear RPM: 540/1000
Engine RPM: [email protected]@2120
Wheelbase: 93.3 Inches [236 Cm] (2WD), 94.9 Inches [241 Cm] (4WD)
Weight: 9568 To 11440 Pounds
Front tire: 7.50x16
Rear tire: 16.9R38 (2WD)
Engine (gross): 115 Hp [85.8 KW]
PTO (claimed): 95 Hp [70.8 KW]
Drawbar (tested): 86.4 Hp [64.4 KW]
PTO (tested): 114.7 Hp [85.5 KW]
Chassis: 4x2 2WD, 4x4 MFWD 4WD (optional)
Final drives: Planetary Inboard
Differential lock: Electro-hydraulic Rear Standard, Front Optional
Steering: Hydrostatic Pwoer
Brakes: Differential Hydraulic Wet Disc
Cab: Two-post ROPS. Cab Optional.
Type: Pressure-flow Compensated (PFC) Optional
Pressure: 2974 Psi [205.1 Bar], 3118 Psi [215.0 Bar] (PFC)
Rear valves: 2 To 4
Pump flow: 19.8 Gpm [74.9 Lpm], 26.5 Gpm [100.3 Lpm] (PFC)
Total flow: 30.3 Gpm [114.7 Lpm], 37 Gpm [140.0 Lpm] (PFC)
Ground: Negative
Charging system: Alternator
Charging amps: 70 (ROPS), 120 (cab)
Cold-cranking amps: 1300
Volts: 12
Engine Detail: CNH, Turbocharged Intercooled Diesel, 4-cylinder, Liquid-cooled, 273.7 Ci [4.5 L]
Bore/Stroke: 4.094x5.196 Inches [104 X 132 Mm]
Power (gross): 115 Hp [85.8 KW]
Fuel system: Bosch Mechanical Direct Injection With 8-hole Injectors
Air cleaner: Dual Paper Elements
Pre-heating: Grid Heater
Compression: 17.0:1
Rated RPM: 2200
Starter volts: 12
Type: Partial Powershift, Partial Powershift
Gears: 24 Forward And Reverse, 16 Forward And Reverse
Clutch: Electro-hydraulic Wet Discs, Electro-hydraulic Wet Discs
Speeds: N/A
Standard tires (ag): Front: 7.50x16. Rear: 16.9R38 (2WD), Front: 14.9R24. Rear: 16.9R38 (4WD)
Weight (shipping): 9,568 Lbs [4340 Kg] (2WD ROPS), 10,516 Lbs [4770 Kg] (2WD Cab), 9,942 Lbs [4509 Kg] (4WD ROPS), 10,890 Lbs [4939 Kg] (4WD Cab)
Weight (operating): 11,440 Lbs [5189 Kg] (4WD Cab)
Wheelbase: 93.3 Inches [236 Cm] (2WD), 94.9 Inches [241 Cm] (4WD)
Height (ROPS): 112.4 Inches [285 Cm]
Height (cab): 112.4 Inches [285 Cm], 115 Inches [292 Cm] (suspended Cab)
Height (exhaust): 113.2 Inches [287 Cm]

All the details about Case International Harvester Mxu110 tractor given above which you should know before buying Case International Harvester Mxu110.

If you are still looking for any additional inforamations about Case International Harvester Mxu110, then you can give your feedbacks using mail.

We hope the informations which we have provided on this portal are enough, still you can send us your valuable suggestions and queries related to tractor's models and related to this site as well.

No Comment(s) Available

    Leave a Comment