Are you searching for case international harvester c50 tractor's information? Here is the detailed information of case international harvester c50 which include, tractor's reviews, mileage and user reviews.

You can also find case international harvester c50 technical specifications & details like case international harvester c50 engine details, transmission, case international harvester c50 tractor tyre dimensions and attachment also included.

When you are in need to know any information about any old to new tractors model, then you can check by visiting this portal. Each and every model of tractors you can find with the latest price, specifications and all the details which you want to grab before buying old or second-hand tractors.

Manufacturer: CaseIH
Factory: Doncaster, England
Original price (USD): $19,700 (1999)
CX50: Deluxe Model
C50: Basic Model
Fuel: 20 Gal [75.7 L]
Hydraulic system: 9 Gal [34.1 L] (2WD), 9.7 Gal [36.7 L] (4WD)
Rear Type: II/I
Control: Mechanical
Rear lift: 3,665 Lbs [1662 Kg], 5,097 Lbs [2311 Kg] (optional)
Rear PTO: Independent
Clutch: Hydraulic Wet Disc
Rear RPM: 540, 540/1000 (optional Dual Shaft)
Wheelbase: 80.9 Inches [205 Cm] (2WD), 83.3 Inches [211 Cm] (4WD)
Weight: 5357 To 7595 Pounds
Front tire: 7.50-16
Rear tire: 14.9-28
Serial Numbers Location: Near The Tractor Steering Column On Right Side.
Engine (gross): 53 Hp [39.5 KW]
Engine (net): 48 Hp [35.8 KW]
PTO (claimed): 40 Hp [29.8 KW]
Drawbar (tested): 35.4 Hp [26.4 KW]
PTO (tested): 42.5 Hp [31.7 KW]
Chassis: 4x2 2WD, 4x4 MFWD 4WD (optional)
Differential lock: Mechanical
Steering: Hydrostatic Power
Brakes: Differential Hydraulic Wet Disc
Cab: Two-post ROPS With Straddle Platform.
Type: Open Center
Capacity: 9 Gal [34.1 L] (2WD), 9.7 Gal [36.7 L] (4WD)
Pressure: 2500 Psi [172.4 Bar]
Valves: 0 To 3
Pump flow: 12.7 Gpm [48.1 Lpm]
Total flow: 15.7 Gpm [59.4 Lpm]
Ground: Negative
Charging system: Alternator
Charging amps: 65
Number: 1
Cold-cranking amps: 650, 810 (optional)
Volts: 12
Engine Detail: Perkins 903.27, Diesel, 3-cylinder, Liquid-cooled, 165 Ci [2.7 L]
Bore/Stroke: 3.74x5.00 Inches [95 X 127 Mm]
Power (gross): 53 Hp [39.5 KW]
Fuel system: Mechanical Direct Injection With 5-hole Injectors
Air cleaner: Dual Paper Elements
Compression: 17.25:1
Rated RPM: 2250
Torque: 140 Lb-ft [189.8 Nm]
Torque RPM: 1200
Starter volts: 12
Oil capacity: 8 Qts [7.6 L]
Oil change: 250 H
Coolant capacity: 12.57 Qts [11.9 L]
Gears: 8 Forward And 4 Reverse, 16 Forward And 8 Reverse, 8 Forward And Reverse, 16 Forward And 8 Reverse
Clutch: 12-inch Dry Disc, 12-inch Dry Disc
Oil capacity: 36 Qts [34.1 L] (2WD), 36 Qts [34.1 L] (2WD), 38.6 Qts [36.5 L] (4WD), 36 Qts [34.1 L] (2WD), 36 Qts [34.1 L] (2WD), 38.6 Qts [36.5 L] (4WD), 36 Qts [34.1 L] (2WD), 36 Qts [34.1 L] (2WD), 38.6 Qts [36.5 L] (4WD)
Type: Partial Power Shift, Creeper
Speeds: N/A
Ag front: 7.50-16
Ag rear: 14.9-28
Weight (shipping): 5,357 Lbs [2429 Kg] (2WD), 6,096 Lbs [2765 Kg] (4WD)
Weight (operating): 7,595 Lbs [3445 Kg]
Weight (max capacity): 10,150 Lbs [4604 Kg]
Wheelbase: 80.9 Inches [205 Cm] (2WD), 83.3 Inches [211 Cm] (4WD)

All the details about Case International Harvester C50 tractor given above which you should know before buying Case International Harvester C50.

If you are still looking for any additional inforamations about Case International Harvester C50, then you can give your feedbacks using mail.

We hope the informations which we have provided on this portal are enough, still you can send us your valuable suggestions and queries related to tractor's models and related to this site as well.

No Comment(s) Available

    Leave a Comment