Are you searching for case international harvester 9250 tractor's information? Here is the detailed information of case international harvester 9250 which include, tractor's reviews, mileage and user reviews.

You can also find case international harvester 9250 technical specifications & details like case international harvester 9250 engine details, transmission, case international harvester 9250 tractor tyre dimensions and attachment also included.

When you are in need to know any information about any old to new tractors model, then you can check by visiting this portal. Each and every model of tractors you can find with the latest price, specifications and all the details which you want to grab before buying old or second-hand tractors.

Manufacturer: CaseIH
Factory: Fargo, North Dakota, USA
Original price (USD): $116,000 (1995)
9260: Four-wheel Steer
9250: Articulated
Fuel: 200 Gal [757.0 L]
Hydraulic system: 18 Gal [68.1 L]
Optional Rear Type: III
Control: Optional
Rear lift: 12,750 Lbs [5783 Kg]
Optional Rear PTO: Independent
Rear RPM: 1000
Engine RPM: [email protected]
Wheelbase: 131 Inches [332 Cm]
Weight: 30,060 Lbs [13635 Kg]
Front tire: 20.8-38
Rear tire: 20.8-38
Serial Numbers Location: Under The Left-side Steps On Front Fender
Engine: 300 Hp [223.7 KW]
PTO (claimed): 266 Hp [198.4 KW]
Drawbar (tested): 237.29 Hp [176.9 KW]
PTO (tested): 271.01 Hp [202.1 KW]
Chassis: 4x4 Articulated 4WD
Steering: Hydrostatic Power With Articulation And Front-axle Steering
Brakes: Integrated Hydraulic Caliper Disc
Cab: Cab Standard With Air-conditioning. Optional Deluxe Cab Adds Side And Rear Windowwipers Plus Internal Storage Compartments.
Type: Closed Center Load Sensing, Pressure Compensating
Capacity: 18 Gal [68.1 L]
Pressure: 2500 Psi [172.4 Bar]
Valves: 4
Total flow: 27 Gpm [102.2 Lpm]
Ground: Negative
Volts: 12
Engine Detail: Cummins LTA-10, Turbocharged Aftercooled Diesel, 6-cylinder, Liquid-cooled, 611 Ci [10.0 L]
Bore/Stroke: 4.921x5.354 Inches [125 X 136 Mm]
Power: 300 Hp [223.7 KW]
Air cleaner: Dual Paper Elements
Compression: 16.0:1
Rated RPM: 2100
Torque: 1015 Lb-ft [1376.3 Nm]
Torque RPM: 1400
Starter volts: 12
Oil capacity: 44 Qts [41.6 L]
Coolant capacity: 54 Qts [51.1 L]
Type: Full Power Shift
Gears: 12 Forward And 3 Reverse
Clutch: Hydraulic Wet Disc
Speeds: With 18.4x38 Tires.
Ag front: 20.8-38
Ag rear: 20.8-38
Weight (operating): 30,060 Lbs [13635 Kg] (20.8R42 Duals)
Wheelbase: 131 Inches [332 Cm]
Length: 272.9 Inches [693 Cm]
Minimum Width: 93.5 Inches [237 Cm]
Duals Width: 144.3 Inches [366 Cm]
Height (exhaust): 143 Inches [363 Cm]
Front tread: 60 To 130 Inches [152 To 330 Cm]
Rear tread: 60 To 130 Inches [152 To 330 Cm]
4WD turn radius: 15.5 Feet [4.7 M]
Front steer 4WD turn radius: 12.2 Feet [3.7 M]

All the details about Case International Harvester 9250 tractor given above which you should know before buying Case International Harvester 9250.

If you are still looking for any additional inforamations about Case International Harvester 9250, then you can give your feedbacks using mail.

We hope the informations which we have provided on this portal are enough, still you can send us your valuable suggestions and queries related to tractor's models and related to this site as well.

No Comment(s) Available

    Leave a Comment