Are you searching for case international harvester 9240 tractor's information? Here is the detailed information of case international harvester 9240 which include, tractor's reviews, mileage and user reviews.

You can also find case international harvester 9240 technical specifications & details like case international harvester 9240 engine details, transmission, case international harvester 9240 tractor tyre dimensions and attachment also included.

When you are in need to know any information about any old to new tractors model, then you can check by visiting this portal. Each and every model of tractors you can find with the latest price, specifications and all the details which you want to grab before buying old or second-hand tractors.

Manufacturer: CaseIH
Factory: Fargo, North Dakota, USA
Original price (USD): $105,000 (1995)
9240: Four-wheel Steer
9230: Articulated
Fuel: 200 Gal [757.0 L]
Hydraulic system: 18 Gal [68.1 L]
Optional Rear Type: III
Control: Optional
Rear lift: 12,750 Lbs [5783 Kg]
Optional Rear PTO: Independent
Rear RPM: 1000
Engine RPM: [email protected]
Wheelbase: 124 Inches [314 Cm]
Weight: 28,214 Lbs [12797 Kg]
Front tire: 18.4-38
Rear tire: 18.4-38
Serial Numbers Location: Under The Left-side Steps On Front Fender
Engine: 235 Hp [175.2 KW]
PTO (claimed): 207 Hp [154.4 KW]
Drawbar (tested): 175.89 Hp [131.2 KW]
PTO (tested): 215.87 Hp [161.0 KW]
Chassis: 4x4 4WD
Steering: Four-wheel Hydrostatic Power
Brakes: Integrated Hydraulic Caliper Disc
Cab: Cab Standard With Air-conditioning. Optional Deluxe Cab Adds Side And Rear Windowwipers Plus Internal Storage Compartments.
Type: Closed Center Load Sensing Pressure Compensting
Capacity: 18 Gal [68.1 L]
Pressure: 2500 Psi [172.4 Bar]
Valves: 4
Total flow: 28 Gpm [106.0 Lpm]
Ground: Negative
Volts: 12
Engine Detail: CDC, Turbocharged Aftercooled Diesel, 6-cylinder, Liquid-cooled, 504.5 Ci [8.3 L]
Bore/Stroke: 4.488x5.315 Inches [114 X 135 Mm]
Power: 235 Hp [175.2 KW]
Air cleaner: Dual Paper Elements
Compression: 16.5:1
Rated RPM: 2200
Torque: 701 Lb-ft [950.6 Nm]
Torque RPM: 1500
Starter volts: 12
Oil capacity: 22 Qts [20.8 L]
Coolant capacity: 29.6 Qts [28.0 L]
Type: Full Power Shift
Gears: 12 Forward And 3 Reverse
Clutch: Hydraulic Wet Disc
Speeds: With 18.4x38 Tires.
Ag front: 18.4-38
Ag rear: 18.4-38
Weight (operating): 28,214 Lbs [12797 Kg] (20.8R38 Duals)
Wheelbase: 124 Inches [314 Cm]
Length: 250.3 Inches [635 Cm]
Minimum Width: 93.5 Inches [237 Cm]
Duals Width: 151.8 Inches [385 Cm]
Height (exhaust): 143.0 Inches [363 Cm]
4WD turn radius: 12.3 Feet [3.7 M]

All the details about Case International Harvester 9240 tractor given above which you should know before buying Case International Harvester 9240.

If you are still looking for any additional inforamations about Case International Harvester 9240, then you can give your feedbacks using mail.

We hope the informations which we have provided on this portal are enough, still you can send us your valuable suggestions and queries related to tractor's models and related to this site as well.

No Comment(s) Available

    Leave a Comment