Are you searching for case international harvester 7210 tractor's information? Here is the detailed information of case international harvester 7210 which include, tractor's reviews, mileage and user reviews.

You can also find case international harvester 7210 technical specifications & details like case international harvester 7210 engine details, transmission, case international harvester 7210 tractor tyre dimensions and attachment also included.

When you are in need to know any information about any old to new tractors model, then you can check by visiting this portal. Each and every model of tractors you can find with the latest price, specifications and all the details which you want to grab before buying old or second-hand tractors.

Manufacturer: CaseIH
Factory: Racine, Wisconsin, USA
Fuel: 78 Gal [295.2 L], 95 Gal [359.6 L] *Optional
Hydraulic system: 45.5 Gal [172.2 L]
Rear Type: III/IIIN
Control: Electronic Lower-link Draft Sensing
Rear lift: 7700 Lbs [3492 Kg]
Rear PTO: Independent
Clutch: Electro-hydraulic Wet Disc
Rear RPM: 540/1000 (dual-shaft 1.375)
Wheelbase: 118.3 Inches [300 Cm]
Weight: 15215 To 19015 Pounds
Front tire: 11.00-16
Rear tire: 18.4R-38
Serial Numbers Location: Serial Number Plate On The Dash Console Inside Tractor Cab, Near The Floor.
PTO (claimed): 130 Hp [96.9 KW]
Drawbar (tested): 116.84 Hp [87.1 KW]
PTO (tested): 132.31 Hp [98.7 KW]
Chassis: 4x2 2WD, 4x4 MFWD 4WD
Differential lock: Electric Rear
Steering: Power
Brakes: Differential Hydraulic Wet Disc
Cab: Cab Standard With Air-conditioning.
Type: Closed Center Pressure Flow Compensated (PFC)
Capacity: 45.5 Gal [172.2 L]
Pressure: 2300 Psi [158.6 Bar]
Valves: 2 To 4
SCV flow: 22 Gpm [83.3 Lpm]
Total flow: 29 Gpm [109.8 Lpm]
Ground: Negative
Charging system: Alternator
Charging amps: 110
Charging volts: 12
Number: 2
Cold-cranking amps: 950
Volts: 12
Engine Detail: CDC, Turbocharged Diesel, 6-cylinder, Liquid-cooled Inline, 504.5 Ci [8.3 L]
Bore/Stroke: 4.488x5.315 Inches [114 X 135 Mm]
Fuel system: Mechanical Injection
Air cleaner: Dual Paper Elements
Pre-heating: Block Heater*Optional
Compression: 17.3:1
Rated RPM: 2200
Starter volts: 12
Oil capacity: 22 Qts [20.8 L]
Coolant capacity: 28 Qts [26.5 L]
Type: Full Power Shift, Creeper
Gears: 18 Forward And 4 Reverse, 24 Forward And 6 Reverse
Clutch: Hydraulic Wet Disc
Speeds: N/A
Ag front: 11.00-16
Ag rear: 18.4R-38
2WD Weight (shipping): 15215 Lbs [6901 Kg]
4WD Weight (shipping): 16230 Lbs [7361 Kg]
Weight (operating): 16,590 Lbs [7525 Kg] (4WD)
Weight (ballasted): 19,015 Lbs [8625 Kg]
Wheelbase: 118.3 Inches [300 Cm]
2WD Clearance (front axle): 22.4 Inches [56 Cm]
4WD Clearance (front axle): 16.6 Inches [42 Cm]
Rear axle: 3.5 By 96 Inches [88x2438 Mm] 3.5 By 112 Inches [88x2844 Mm]
2WD[152 to 223 cm] 2WD} 60 to 95 inches {4WD}[152 to 241 cm] {4WD} Front tread: 60 To 88 Inches

All the details about Case International Harvester 7210 tractor given above which you should know before buying Case International Harvester 7210.

If you are still looking for any additional inforamations about Case International Harvester 7210, then you can give your feedbacks using mail.

We hope the informations which we have provided on this portal are enough, still you can send us your valuable suggestions and queries related to tractor's models and related to this site as well.

No Comment(s) Available

    Leave a Comment