Are you searching for case international harvester 1494 tractor's information? Here is the detailed information of case international harvester 1494 which include, tractor's reviews, mileage and user reviews.

You can also find case international harvester 1494 technical specifications & details like case international harvester 1494 engine details, transmission, case international harvester 1494 tractor tyre dimensions and attachment also included.

When you are in need to know any information about any old to new tractors model, then you can check by visiting this portal. Each and every model of tractors you can find with the latest price, specifications and all the details which you want to grab before buying old or second-hand tractors.

Manufacturer: CaseIH
Fuel: 35.9 Gal [135.9 L]
Rear Type: II
Rear lift (at ends): 5,366 Lbs [2434 Kg]
Rear lift (at 24 inch/610mm): 3,210 Lbs [1456 Kg]
Rear PTO: Independent
Rear RPM: 540/1000
Wheelbase: 88.5 Inches [224 Cm]
Weight: 7380 To 8180 Pounds
Front tire: 7.50-16
Rear tire: 18.4-34
Serial Numbers Location: Right Side Of Main Frame
Engine: 85 Hp [63.4 KW]
PTO (claimed): 75 Hp [55.9 KW]
Chassis: 4x2 2WD, 4x4 MFWD 4WD
Steering: Power
Brakes: Disc
Cab: Cab Optional With Air-conditioning.
Type: Open Center
Pressure: 2475 Psi [170.7 Bar]
Valves: 1 To 3
Total flow: 8.5 Gpm [32.2 Lpm], 15.3 Gpm [57.9 Lpm] (tandem)
Steering flow: 7.7 Gpm [29.1 Lpm]
Steering press.: 1850 Psi [127.6 Bar]
Charging system: Alternator
Charging amps: 45, 65 (heavy Duty)
Cold-cranking amps: 420, 550 (heavy Duty)
Volts: 12
Amp-hours: 96, 128 (heavy Duty)
Engine Detail: Case, Turbocharged Diesel, 4-cylinder, Liquid-cooled, 219 Ci [3.6 L]
Bore/Stroke: 3.937x4.50 Inches [100 X 114 Mm]
Power: 85 Hp [63.4 KW]
Compression: 16:1
Rated RPM: 2200
Torque: 218.3 Lb-ft [296.0 Nm]
Torque RPM: 1600
Starter volts: 12
Oil capacity: 7.8 Qts [7.4 L]
Coolant capacity: 15 Qts [14.2 L]
Type: Synchromesh, Partial Power Shift
Gears: 12 Forward And 4 Reverse, 12 Forward And 4 Reverse
Oil capacity: 33.6 Qts [31.8 L], 33.6 Qts [31.8 L]
Transmission: Hydra-Shift
Ag front: 7.50-16 (2WD), 7.50-18 (2WD), 11L-15 (2WD), 10.00-16 (2WD), 12.4-24 (4WD)
Ag rear: 18.4-34, 16.9-34, 13.6-38
Weight: 7,380 Lbs [3347 Kg] (2WD Synchro), 7,660 Lbs [3474 Kg] (2WD Hydra-Shift), 8,005 Lbs [3631 Kg] (4WD Synchro), 8,180 Lbs [3710 Kg] (4WD Hydra-Shift)
Drawbar capacity: 3,000 Lbs [1360 Kg]
Front axle load: 7,000 Lbs [3175 Kg] (2WD), 7,500 Lbs [3402 Kg] (4WD)
Rear axle load: 10,500 Lbs [4762 Kg]
Wheelbase: 88.5 Inches [224 Cm]
Length: 147.5 Inches [374 Cm]
Width: 75 Inches [190 Cm]
Height (cab): 102 Inches [259 Cm]
Ground clearance: 14 Inches [35 Cm] (4WD), 16.5 Inches [41 Cm] (2WD)
Front tread: 56 To 80 Inches (2WD)[142 To 203 Cm] (2WD) 60 To 76 Inches (4WD)[152 To 193 Cm] (4WD)
Rear tread: 56 To 80 Inches [142 To 203 Cm]

All the details about Case International Harvester 1494 tractor given above which you should know before buying Case International Harvester 1494.

If you are still looking for any additional inforamations about Case International Harvester 1494, then you can give your feedbacks using mail.

We hope the informations which we have provided on this portal are enough, still you can send us your valuable suggestions and queries related to tractor's models and related to this site as well.

No Comment(s) Available

    Leave a Comment